Connecting To The Internet; Settings; Security Settings; Network Settings - Zte MF652 Help File

High speed usb data modem

Table of Contents

3.2 Connecting to the Internet

Once you are connected you can browse web pages and access the Internet through the modem. You

can also receive SMS while surfing on the Internet.

Connect to the Internet

Click the Internet button, then click Connect to proceed.

 The card takes a few seconds to verify your connection and then shows 'Status: Connected ...', .

 The data amount, connected time etc are displayed in the main window

 You can access the Internet and receive email etc by launching your usual applications eg Browser or

Mail software.

 When you are connected the Connect button changes to Disconnect. Click Disconnect to end

your session.

Disconnect from the Internet

Click Disconnect to disconnect from the Internet.

Internet Connection Records

Click Logs to show the internet connection records interface.

Click the Settings icon to switch to the settings interface.

Note:

Normally there is no need to change any of these settings as they are pre-configured for your network. If

you change networks or are roaming you may need to modify some settings. Consult your service

provider for more information.

Enable the PIN Code:

You can enable a PIN code using the PIN enable feature. When enabled you need to enter your PIN to

start the modem. The PIN code is stored on the USIM card. Consult your service provider for more

information or if you forget your PIN. Click Revise PIN to modify the number.

1. Operator Selection:

Automatic: The system selects the preferred network automatically depending on the user's selected

rules and the network status.

Manual: The network can be manually selected by the user.

When Manual is selected click Apply to search for available networks.

Table of Contents