Camera INSTALLATION INSTRUCTIONS: The VS-185 is a special designed OEM camera with a custom mounting bracket that allows it to be easily adjusted for a better viewing angle. It is designed to be custom mounted on the license plate bezel for the Honda Accord 2008-2011 vehicles with minimal installation time and with no special tools required for the job.
Page 2
INSTALLATION MOUNTING: 1. The VS-185 is design to be mounted on the License Plate bezel of a Honda Accord vehicle. If you wish to mount this camera on any other vehicle, double check the mounting location to see if the camera will fit on your vehicle in your location of choice.
Page 3
Ground RED WIRE BLACK WIRE Connect to +12V License Plate Illumination Wire VS-185 Ground TECH SUPPORT: (800) 998-6880 SPECIFICATIONS: 1/4 Inch Color CMOS Sensor Video Output: 1.0 V P-P composite (75 Ohm load) Dimension (In.): 2¼"(L) × 2⅛"(W) × 1⅜"(D) Supply Voltage: +12VDC Weight: 5 Oz.
Page 4
DISCLAIMER: Under no circumstances shall the manufacturer or distributor of the Securview™ be held liable for consequential or incidental damages sustained in connection with the use of the Securview™ Rear Vision System. The Securview™ is designed as a safety enhancement device and is in no way intended as a replacement for rear-view mirrors, side-view mirrors or physically checking the surroundings when backing a vehicle.