VS-186 Wide-Angle Adjustable OEM Camera INSTALLATION INSTRUCTIONS: The VS-186 is a special designed OEM camera with a custom mounting bracket that allows it to be easily adjusted for a better viewing angle. It is designed to be custom mounted on the license plate bezel for the Honda CRV &...
Page 2
INSTALLATION MOUNTING: STEP 1 STEP 2 Remove factory license plate lamp Connect the camera lamp illumination wires HONDA STEP 4 STEP 3 Mounting Surface Adjustable Bracket Camera Lens Route the wiring harness into the vehicle Snap the VS-186 camera into place STEP 1 STEP 2 Connect the camera lamp illumination wires...
Page 3
MOUNTING (Continued): 1. Unclip and remove the factory license plate illumination lamp using a screw driver or panel removing tool (STEP 1). Be cautious not to scratch the paint on the body surface. 2. Connect the license plate lamp illumination wires of the VS-186 to the factory license plate illumination lamp harness that was connected to the factory lamp (STEP 2) 3.