Chapter 3 Connect To A Wireless Network; To Connect Using Twcu - TP-Link Archer T4UH User Manual

Chapter 3 Connect to a Wireless Network

With both the hardware and software successfully installed into your computer, you can quickly
connect to a wireless network using one of the following methods.
Method One: To connect using TWCU (TP-LINK Wireless Configuration Utility)

Archer T4UH uses the TWCU as the management software. The utility provides you an easy
interface to connect to a network and to change any settings related to the wireless adapter.
Method Two: To connect using WPS

By this method, you can connect to your network quickly on the condition that your Router or
access point supports WPS or QSS as is called by some other products.
Method Three: To connect using Windows built-in wireless utility

Windows users may use the built-in wireless utility to connect to a wireless network. For specific
operations, please go to

3.1 To connect using TWCU

1. After installation, the utility configuration page will automatically pop up on the screen. If the
utility page does not pop up, you can also launch the utility by double-clicking the
on your desktop.
Archer T4UH AC1200 High Gain Wireless Dual Band USB Adapter
Section 3.3 To connect using Windows built-in wireless
Figure 3-1
9
utility.
icon