Navigate To An Icon; Routes - Lowrance LMS-334c iGPS Installation And Operation Instructions Manual

The Delete All Icons command will ask if you are sure. Press ← to
| . All icons will be deleted from the map.
Y ENT
ES
The Delete by Symbol command will launch the Select Symbol menu.
Press ↑ ↓, ← → to select the icon symbol to delete, then press
message appears letting you know all icons with the selected symbol
have been deleted.
The Delete From Map command will prompt you to move the cursor
over an icon to select it. After selecting the icon, press
pears from the map.

Navigate to an Icon

Use the Navigate to Cursor command and use the cursor to select the
desired icon on the map.
1. Use arrow keys to center cursor crosshairs over the icon.
2. To navigate to the selected icon location: press
Follow course line on the Map Page or the compass bearing arrow on the
Navigation Page.

Routes

A route is a series of waypoints, linked together in an ordered sequence
to mark a course of travel. You can visualize a route as a string of
beads. The beads represent waypoints and the string represents the
course of travel connecting waypoint to waypoint.
The course from one waypoint to the next is a leg. Routes are composed
of one or more legs. The legs of all GPS routes are based on straight
lines between waypoints.
A route provides the automatic capability to navigate through several
waypoints without having to reprogram the unit after arriving at each
Delete icons menu.
129
ENT
and it disap-
ENT
| |
MENU ENT EXIT
. A
.