Table of Contents
Advertisement
CALIBRATION
MENU TIME OUT
DOME ANSWER
to escape the collision of the command using some DVR.
PST FOCUS
MOTOR SETUP
Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired speed with twist
the Joystick left or right. During operation, pressing 153 + ON will change the speed to the SLOW mode
and pressing 153 + OFF will change the speed to the Normal mode.
Holding and pressing CTRL and moving the joystick will operate with the TURBO speed mode.
PROPOTIONAL
P/T MODE
SLOW PAN MAXIMUM
SLOW TILT MAXIMUM
NORMAL PAN MAXIMUM : 40˚- 360˚/second
NORMAL TILT MAXIMUM : 40˚- 200˚/second
TURBO PAN MAXIMUM
TURBO TILT MAXIMUM
ORIGIN CHECK
When you find the wrong position of the dome during operation, execute this origin check and the dome
camera will arrange the right position after the origin check operation.
Pressing 151 + ON will execute the origin check.
: ON (Auto origin check) / OFF
: ON(5mintues) / OFF( always menu display)
; ON / OFF(no acknowledge command from the dome) This option is helpful
: Set the default mode of the focus when you save the preset
(AUTO / MANUAL / ONE PUSH)
MOTOR SETUP
PROPOTIONAL PT
PT MODE
SLOW PAN MAX
SLOW TILT MAX
NORMAL PAN MAX
NORMAL TILT MAX
TURBO PAN MAX
TURBO TILT MAX
SAVE AND EXIT
P/T : ON / OFF
: SLOW / NORMAL / TURBO
: 19˚- 90˚/second
: 19˚- 90˚/ second
: 200˚- 380˚/second
: 90˚- 300˚/second
ARE YOU SURE ?
CANCEL
: ON
: NORMAL
: 40°/SEC
: 40°/SEC
: 90°/SEC
: 90°/SEC
: 360°/SEC
: 100°/SEC
ORIGIN CHECK
OK
Advertisement
Table of Contents
