Advertisement
TIME SETTING MODE
To set the time and date
Day of week
1. Use C to enter the Time Setting Mode.
PM indicator
Date
• The seconds digits flash, because they are selected .
A
B
2. Press A to change the selection in the following se-
PM
quence.
Seconds
C
D
E
Day of Week
Hour : Minutes
Seconds
3. While the seconds digits are selected (flashing), press B to reset the seconds to
If you press B while the seconds count is in the range of 30 to 59, the seconds are
reset to
and 1 is added to the minutes. If the seconds count is in the range of 00
00
to 29, the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press B to increase
the number. While the day of the week is selected, pressing B advances to the next
day. Holding down B changes the current selection at high speed.
5. After you set the time and date, press C to return to the Timekeeping Mode.
• The watch does not make any allowance for leap years. Be sure to manually set Feb-
ruary 29 for the appropriate day of the week.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
Minutes
Hour
Date
Month
.
00
Important!
Keep the watch about 5cm (2 inches) from your
mouth when recording!
1588-2
Advertisement
