Marantz NR1506 Owner's Manual page 179

Contents Connections
Notes concerning use of "Update" and "Add New Feature"
In order to use these functions, you must have the correct system
0
requirements and settings for an Internet connection. (v p. 44)
Do not turn off the power until updating or upgrading is completed.
0
Approximately 1 hour is required for the updating/upgrading procedure
0
to be completed.
Once updating/upgrade starts, normal operations on this unit cannot
0
be performed until updating/upgrading is completed. Furthermore,
there may be cases where backup data is reset for the parameters,
etc., set on this unit.
If the update or upgrade fails, press and hold the X on the main unit for
0
more than 5 seconds, or remove and re-insert the power cord. "Update
Retry" appears on the display and update restarts from the point at
which update failed. If the error continues despite this, check the
network environment.
0 Information regarding the "Update" function and "Add New Feature" will be
announced on the Marantz website each time related plans are defined.
Front panel Display
Playback Settings
Information
Show information about this unit settings, input signals, etc.
o Audio
Show the audio information.
Sound Mode:
Input Signal:
Format:
Sample Rate:
Offset:
Flag:
179
Rear panel
Tips
The currently set sound mode.
The input signal type.
The number of input signal channels
(presence of front, surround, LFE).
The input signal's sampling frequency.
The dialogue normalization correction
value.
This is displayed when inputting signals
including a surround back channel.
"MATRIX" is displayed with DTS-ES
Matrix input signals, "DISCRETE" with
DTS-ES Discrete signals.
Remote Index
Appendix