Table of Contents
Advertisement
It is recommended you install the Appliance in a place where the ambient temperature is
between 23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in extreme
cold or hot conditions may cause interior temperatures to fluctuate.
You can select temperature display setting from Fahrenheit to Celsius degree by touching the ºF/ºC
mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature display
window.
ON/OFF POWER
To turn OFF the appliance, touch the ON / OFF or
SETTING THE TEMPERATURE CONTROL
•
You can set the temperature as you desire by touching the UP or DOWN mark. When you touch
the two marks for the first time, the LED readout will show the original temperature set at previous
time 。
•
The temperature that you desire to set will increase 1ºF or 1ºC if you touch the UP mark once, on
the contrary the temperature will decrease 1ºF or 1ºC if you touch the DOWN mark once.
•
The temperature inside the unit will be appeared in blue color in the display window.应该删除
NOTE:
•
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay, the Appliance will not start.
•
When you use the Appliance for the first time or restart the Appliance after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the Appliance is running for a few hours everything will be back to normal.
INTERIOR LIGHT
The interior light with be turned ON every time the door is opened and OFF once the door is closed
DOOR LOCK
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User's Guide. Insert the key into the lock
and turn it counterclockwise to unlock the door. To lock the door do the reverse operation making
sure metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.
OPERATING YOUR APPLIANCE
10
mark and hold for 2 seconds.
Advertisement
Table of Contents
