Switch To Aviation Mode; Switch Back To Land Mode From Aviation Mode; Trails; Create And Save A Trail - Lowrance AirMap 600c Operation Instructions Manual

sor and let the map return to the current or last known position. (Be-
fore you completely exited out of the Search menus, you could have
gone looking for another place.)

Switch to Aviation Mode

To leave Land Mode and switch to Aviation Mode:
1. Press
MENU
2. Unit asks, "Are you sure you want to turn on aviation mode?"
3. Press ←|
ENT

Switch Back to Land Mode from Aviation Mode

leave Aviation Mode and switch back to Land Mode:
To
1. Press
MENU
2. Unit asks, "Are you sure you want to turn on land navigation mode?"
3. Press ←|
ENT
NOTE:
In Aviation Mode, trail displays are turned off by default, but trails
may still be recording. When you switch the unit back to Land
Mode, any trails you've recorded will again be displayed. If these
trails cause too much clutter on the map display, you can hide them
(using the Map Categories Shown option) or delete any unneces-
sary trails (as described in the following segment).

Trails

A trail, or plot trail, is a string of position points plotted by AirMap as
you travel. It's a travel history, a record of the path you have taken.
Trails are useful for repeating a journey along the same track. They are
particularly handy when you are trying to retrace your trip and go back
the way you came.
AirMap lets you save up to 100 trails in its memory. Since you can copy
these trails to MMCs in the form of GPS Data Files (*.usr format), the
only true limit on the number of trails you can record is the number of
MMCs you can carry in your pockets.
(For various trail options, see the Trail Options entry in Sec. 5.)

Create and Save a Trail

AirMap is set at the factory to automatically create and record a trail
while the unit is turned on. It will continue recording the trail until the
length reaches the maximum trail point setting (default is 2,000, but
the unit can record a single trail up to 9,999 points long). When the
point limit is reached, AirMap begins recording the trail over itself.
| |↓ to
MENU S
and the unit switches to Aviation Mode.
| |↓ to
MENU S
and the unit switches to Land Mode.
|↓ to
S
YSTEM ETUP
|↓ to
S
YSTEM ETUP
76
|
E A M
NABLE IR AP
D A M
ISABLE IR AP
.
ENT
| .
ENT