Table of Contents
Advertisement
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from AirMap's memory onto an MMC.
The unit will display first a progress then a completion message when the
data transfer is finished. To return to the Page view, press
4. Loading: There may be more than one GPS Data File (*.USR) on
the card. To select a file, press
or ↑ to highlight the file, then press
press ↓ to
L
OAD
the data transfer is finished. To return to the Page view, press
|
.
EXIT
EXIT
From left to right, these figures show the menu sequence for loading a
GPS Data File from an MMC into AirMap's memory.
Switch to Land Mode
leave Aviation Mode and switch to Land Mode:
To
1. Press
MENU
2. Unit asks, "Are you sure you want to turn on land navigation mode?"
3. Press ←|
ENT
|
. The unit will display a completion message when
ENT
|
|↓ to
MENU
S
and the unit switches to Land Mode.
to activate the selection box, use ↓
ENT
ENT
|
S
ENT
YSTEM
ETUP
55
to accept the selection. Next,
|↓ to
D
ISABLE
|
.
EXIT
EXIT
|
.
A
M
ENT
IR
AP
Advertisement
Table of Contents
