Lowrance GlobalMap Baja 480C Operation Instructions Manual page 68

1.
Route creation sequence (from left to right): Fig. 1. Set route waypoint
(1) at 11th St. & 145th Ave. Fig. 2. Zoom in; move cursor north to set
point (2) at 145th & Admiral. Fig. 3. With point (2) set, move cursor east
to mark interstate on-ramp with waypoint (3). In figures 2 and 3, no-
tice the rubber band line extending from the previously set waypoint
to the cursor. This line will become the course for the route.
4.
Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp
turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading
to river. Waypoint (5) ends the route at a tree stand in the hunting
area. Fig. 6. Press EXIT to save the route and you return to this screen.
5. Move the cursor to the next point in the route, a spot where you need
to turn or change direction, and press
6. Repeat step five until the route reaches your destination.
7. To save your route, press
screen, with the route automatically named "Route 1" and stored in the
unit's internal memory. (In our example, Route 1 already existed, so the
unit automatically made "Route 2.")
2.
5.
to set the next waypoint.
ENT
. The unit reverts to the Edit Route
EXIT
62
3.
6.