■
Assembling the pedestal
42-inch model
50-inch model
1
2
■
Adjusting the panel to your desired angle
42-inch model
50-inch model
●
Do not place any objects within the full rotation range.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
4 Pull out the cover.
42-inch model
5 Remove the assembly screws
6 Remove the assembly screws
B
4
F
A
3
C
D
E
A
42-inch model
50-inch model
(View from the top)
(
42-inch model
from the cover.
50-inch model
from the bracket.
from the back of the base and pull out the neck.
55-inch model
42-inch model
50-inch model
Secure the base as shown below to prevent the TV
from falling over.
●
The place where the base is secured should be thick
15°
enough and made of hard material.
15°
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
) /
(
50-inch model
55-inch model
42-inch model
50-inch model
6
B
42-inch model
5
50-inch model
A
55-inch model
) from the TV.
7