Table of Contents
Advertisement
With Automatic Rebuild and Immediate Rebuild options selected, the daemon
automatically initiates an immediate rebuild. If the end-user wants the daemon to delay the
rebuild until after the first write to the SAFE volume, select the Rebuild Only If Needed
option. The latter setup allows temporary removal of a hard disk drive without requiring a
rebuild. To minimize the possibility of data loss, the rebuild process should be set up to start
immediately.
With Manual Rebuild selected, the end-user decides when to initiate rebuild following a
rebuild prompt. Unless the SteelVine Manager is actively monitored, the Automatic rebuild
should be set up to minimize the possibility of data lose.
8-3 Configure a rebuild
1. Select Specify Policy from the Edit menu of the Status window
5 Bay Raid System User Manual
39
Advertisement
Table of Contents
