VIPowER VPMP-75511R User Manual page 22

9. Click the "Create a New Volume" toolbar button.
10. Select the FAST radio button in the Storage Policy section.
11. Select the "Use" check box beneath both Drive 0 and Drive 1. This example
illustrates two-drive stripping.
12. Move the slider beneath Drive 0 all the way to the right to allocate the remaining
capacity on the two drives to the Fast volume.
If you wish, you can allocate less than the total remaining capacity to the new volume.
However, doing so makes the unallocated capacity unavailable and unused.
20 5 Bay Raid System User Manual