Related Manuals for Nauticam NA-TG3
Summary of Contents for Nauticam NA-TG3
- Page 2 Thank you for your purchase of a NAUTICAM camera housing. At NAUTICAM, we pride ourselves on the ability to recognise the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products. We strive to achieve a high level of user-friendliness by allowing stress-free installation and easy operation of all important functions of the camera.
- Page 3 NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the owner to carefully follow the instructions in our manuals.
- Page 4 1. NA-TG3 housing 2. Instruction manual 3. Spare silicone rubber housing o-ring 4. O-ring remover 5. Lubricant 6. Set of Allen keys 7. Diffuser Lubricant Spare silicone rubber o-ring O-ring remover Set of Allen keys Diffuser...
- Page 5 O-ring(s). 2. Do not use lubricants from other brands with the silicone rubber O- ring on this housing, only use the lubricant provided by NAUTICAM. 3. Discontinue use immediately should you notice any leakage. 4. Store the housing in a robust, shock-proof container during transportation;...
- Page 6 Specifications Identification of Parts Preparation of the Housing Opening and Locking the Housing Installing the Camera Care and Maintenance Optional Accessories...
- Page 7 Housing body: Aluminium alloy Construction Surface treatment: Hard anodised Display window: Abrasion resistant polycarbonate Width: 160mm Dimensions Height: 98mm Depth: 65mm Weight Approx. 0.60kg (without camera) Buoyancy Slightly negative Depth rating 100 metres Optical fibre mount included for external strobes connection, TTL capability: utilising the camera’s pop-up flash as trigger.
- Page 8 On/off button M10 strobe mounting base Zoom lever Accessory coldshoe Shutter release lever Optical fibre mount Housing lock safety button Port with 52mm thread Housing lock...
- Page 9 * The maximum length of screws that can be used with the tripod sockets is 4mm Mounting holes for LCD OK button Magnifier attachment rails Info button Flash/ Right selection button Movie button Left selection button Sequential shooting/ Self-timer/ Playback button Down selection button Mode dial Menu button...
- Page 10 1. After verifying that the housing O-ring is in good condition, lightly coat it with the lubricant provided. 2. Make sure the O-ring groove located in the rear part of the housing is free from any foreign material; the groove can be cleaned with the aid of a microfiber cloth.
- Page 11 To open the housing: 2. Turn the housing lock anti- 1. Press the housing lock safety clockwise for 270°, until the lock button. reaches the “Open” position as shown. To lock the housing: 3. Close the housing while the 4. Turn the housing lock clockwise housing lock is in the “Open”...
- Page 12 1. Place the camera inside the 2. Confirm that all the controls of housing as shown. the housing are correctly engaged.
- Page 13 A damaged O-ring should be discarded immediately and replaced only with one that is provided by NAUTICAM. 3. Replace the main O-ring annually. 4. It is recommended that you ship the housing to our distributor for a...
- Page 14 P.N. 25123 LCD Magnifier attachment rails for NA-S110/S120/TG3 P.N. 25106 LCD Magnifier with Dioptric Adjustment...
Need help?
Do you have a question about the NA-TG3 and is the answer not in the manual?
Questions and answers