Subscribe to Our Youtube Channel
Related Manuals for Nauticam NA-NINJA2
Summary of Contents for Nauticam NA-NINJA2
- Page 2 Thank you for your purchase of a NAUTICAM housing. At NAUTICAM, we pride ourselves on the ability to recognise the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products. We strive to achieve a high level of user-friendliness by allowing stress-free installation and easy operation of all important functions of the camera.
- Page 3 Except HDMI cables are limited to 4months. 2. NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the owner to carefully follow the instructions in this manual.
- Page 4 1. NA-NINJA2 housing 2. Standard HDMI bulkhead with M16 thread with cap 3. HDMI (D-C) cables (110mm, 130mm, 190mm) 4. Instruction manual 5. Spare silicone rubber main o-ring 6. O-ring remover 7. CR2032 battery (for moisture alarm) 8. Lubricant HDMI bulkhead with M16...
- Page 5 O-ring(s). 2. Do not use lubricants from other brands with the silicone rubber O-ring on this housing, only use the lubricant provided by NAUTICAM. 3. Discontinue use immediately should you notice any leakage. 4. Store the housing in a robust, shock-proof container during transportation;...
- Page 6 Specifications Identification of Parts Opening and Locking the Housing Preparation of the Housing Installing the Camera Connecting to the Camera Housing Care and Maintenance Optional Accessories...
- Page 7 Housing body: Aluminium alloy Construction Surface treatment: Hard anodised Display window: Abrasion resistant polycarbonate Width: 190mm Dimensions Height: 164mm Depth: 95mm Weight Approx. 1.09kg Buoyancy About neutral Depth rating 100 metres Normal operating temperature is between 10°C and Operating 40°C. For usage outside the stated temperature range, Temperature please contact our dealers for more information.
- Page 8 Cap for HDMI cable Focus Peaking button HDMI cable Zebra button Moisture alarm window On/ off button M22 accessory port False Colour button Ball joint Record/ Blue for Exposure button Menu function knob Housing lock safety button Back/ Cancel button Housing lock...
- Page 9 To open the housing: 1. Press the housing lock safety 2. Turn the housing lock anti- button. clockwise for 270°, until the lock reaches the “Open” position as shown. To lock the housing: 3. Close the housing while the 4. Turn the housing lock clockwise housing lock is in the “Open”...
- Page 10 1. After verifying that the main O-ring is in good condition, lightly coat it with the lubricant provided. 2. Make sure the O-ring groove located in the rear part of the housing is free from any foreign material; the groove can be cleaned with the aid of a microfiber cloth.
- Page 11 To install the monitor into the housing: 1. Connect the HDMI cable with "L " 2. Place the monitor inside the connector to the monitor. housing as shown. 4. Rotate the menu function knob 3. Confirm that all the controls of anti-clockwise for accessing the the housing are correctly "Camcorder"...
- Page 12 For installing the standard HDMI bulkhead with M16 thread: Unscrew the M16 plug from the threaded hole with a coin. Tighten the HDMI bulkhead with a spanner. iii. Connect the HDMI cable to the HDMI bulkhead.
- Page 13 Connect the HDMI cable to the camera's HDMI connector. For installing the custom HDMI bulkhead to use with extension: Unscrew the M16 plug from the accessory port with a coin. Tighten the socket extension to the camera housing with a spanner.
- Page 14 iii. Insert the HDMI cable through the threaded hole from inside of the housing. Connect the HDMI cable to the HDMI bulkhead. Tighten the HDMI bulkhead by turning the threaded ring on the socket extension. Connect the HDMI cable to the camera's HDMI connector.
- Page 15 For connecting NA-NINJA2 to HDMI bulkhead: Unscrew the cap of the HDMI bulkhead. iii. Unscrew the cap of the NA-NINJA2 HDMI cable. iii. Align and plug the HDMI cable in the HDMI bulkhead. Tighten the connection by turning the threaded ring on the HDMI...
- Page 16 O-ring with the provided lubricant before reinstalling it in the groove. A damaged O-ring should be discarded immediately and replaced only with one that is provided by NAUTICAM. 4. Replace the main O-ring annually.
- Page 17 P.N. 17912 Monitor hood for NA-NINJA2 housing...
Need help?
Do you have a question about the NA-NINJA2 and is the answer not in the manual?
Questions and answers