Alarms - Peqlab EV200 Series Instruction Manual

ALARMS

GROUND LEAKAGE
A dangerous ground leakage is present (check thoroughly the
entire assembly). Your power supply is NOT defective! See Fre-
quently Asked Questions at the end of this manual.
SHORT-CIRCUIT
Connected tank is short-circuited or has a very low resistance
(check thoroughly the complete assembly). Your power supply is
NOT defective! See Frequently Asked Questions at the end of
this manual.
OVERLOAD
Connected tank has a too low resistance (check specifications).
Your power supply is NOT defective! See Frequently Asked
Questions at the end of this manual.
CURRENT<1mA
The output current is lower than 1 mA (switch the alarm off in
the SET-UP menu). Your power supply is NOT defective! See
Frequently Asked Questions at the end of this manual.
CALL SERVICE
Failure in the electronics. Contact the PEQLAB technical service
(service@peqlab.de)
You may also t y a general RESET: switch the instrument on while keeping the SET button pressed. Attention! All r
stored program and data will be erased. s
PEQLAB Biotechnologie GmbH_V1107
***
***
***
***
***
16
ERROR
GROUND LEAKAGE
ERROR
SHORT CIRCUIT
ERROR
OVERLOAD
ERROR
CURRENT < 1mA
ERROR
CALL SERVICE
***
***
***
***
***