Introduction; Distributor; Manufacturer; Warranty - Peqlab EV200 Series Instruction Manual

INTRODUCTION

This instrument is manufactured with the latest technology and requires no particular maintenance.
PEQLAB certifies that this instrument was thoroughly inspected by the manufacturer, tested at the factory
prior to shipment and found to meet all requirements defined by contract under which it is furnished.
However, dimensions and other physical characteristics may vary.
The normal operating temperature should be between 0° and 40°C. Never use the instrument in a room
with high humidity (>95 %) or at very low temperatures (condensation water!).
Connect the instrument only to an earthed power line. The required power source is indicated on the
label at the back of the instrument. Do not cut and splice the power cord. When removing the power
cord from the wall outlet, be sure to unplug by holding the plug attachment and not by pulling the cord.
Do not hold the plug with wet hands.

DISTRIBUTOR

PEQLAB Biotechnologie GmbH
Carl-Thiersch-Str. 2b
91052 Erlangen
Germany

MANUFACTURER

Consort nv
Parklaan 36
B2300 Turnhout
Belgium

WARRANTY

This instrument (excluding all accessories) is warranted against defective material and workmanship for
a period of three years from the date of shipment. PEQLAB will repair all defective equipment returned
during warranty without charge, provided the equipment has been used under normal laboratory condi-
tions and in accordance with the operating limitations and maintenance procedures in this instruction
manual and when not having been subject to accident, alteration, misuse or abuse. Please contact the
PEQLAB technical service before returning a product for warranty repair! PEQLAB is not liable for con-
sequential damages resulting from the use or handling of its products.

SERVICING

In the event of this instrument being returned for servicing, the owner is requested to remove the power
supply lead and NOT to send the following items unless they are suspect:
Manual
Cables
Accessories
If serious malfunctioning occurs, stop using the unit immediately and consult the PEQLAB technical ser-
vice.
PEQLAB Biotechnologie GmbH_V1107
9
Tel (+49) (0) 9131 610 7020
Fax (+49) (0) 9131 610 7099
E-mail: info@peqlab.de
Tel (+32)(14)41 12 79
Fax (+32)(14)42 91 79
E-mail: info@Consort.be