Eddy Wireless EDW-310BB User Manual

Gps vehicle tracker

Advertisement

Quick Links

GPS Vehicle Tracker EDW-310BB
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDW-310BB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Eddy Wireless EDW-310BB

  • Page 1 GPS Vehicle Tracker EDW-310BB USER MANUAL...
  • Page 2: Table Of Contents

    ZY INTERNATIONAL LIMITED GPSTrackerVT310BBManual 1.Introduction..................3 2. EDW-310BB overview ……………………………………….……5 3. Specification ………………………………………………….. 12 4. Function ……… ……………………………………………..15 5. Get start …………………..……………………………………..18 6. Trouble shoot …………………………………………………….21 7. More SMS command ……………………………………….23...
  • Page 3: Introduction

    1.Introduction EDW-310BB which come in a compact design is a powerful real time fleet management and vehicle tracking system using high sensitivity GPS and wireless GSM/GPRS communication. This self-contained and autonomous tracking device including GSM module, GPS receiver, Li- ion battery and Multi analog input is able to be used as observing the location of vehicle ,detecting temperature ,detecting fuel costing.
  • Page 4: Edw-310Bb Overview

    2.EDW-310BB overview 2.1 EDW-310BB unit EDW-310BB is designed in a compact and simple rugged Aluminum enclosure. At the end of the unit ,there are 2 LED indicators shows the status of the unit. And various ports for vehicle interface, USB interface, external GSM/GPRS antenna connector ,external GPS antenna connector are on both side of the device.
  • Page 5: Led Indicators

    2.2 LED indicators Logo LED name Description GSM/GPRS status Green LED on: GSM/GPRS connection indicator status Green LED blinking: Boot completion status Green LED off: Idle status GPS status indicator Orange LED on: GPS position fixed Orange LED blinking: During GPS signal reception 2.3 Connect 1 Please refer to the following table to understand the function...
  • Page 6 **:Digital input 4,Digital input 5 is positive trigger 2.6 External GSM/GPRS antenna EDW-310BB has the quad-band GSM/GPRS antenna according to the supported bandwidth in users’ areas. 2.7 External GPS antenna EDW-310BB has an external GPS antenna. 2.8 Package contents The basic package is including EDW-310BB,GPS antenna,...
  • Page 7: Specification

    GSM/GPRS antenna, cables. The optional accessory including :Hand-free kit, Mobile data terminal, CCD camera, RFID reader, temperature sensor, tank fuel level sensor. For more details about optional accessory ,please refer to “ GPS AVL Accessory Guide V2[1].0” 3.Specification 3.1 Software Features SMS mode/GPRS mode/SMS+GPRS mode Position request via SMS or GPRS Data logging capacity: up to max 144,000 point...
  • Page 8: Technical Specification

    External GSM/GPRS antenna GPS antenna Indication:2 LED indicator for GSM/GPRS and GPS status 3.3 Technical specification GSM/GPRS specification Frequency Simcom 300D:900/1800/1900Mhz Bands Simcom 340D: 850/900/1800/1900Mhz GSM class Small MS Transmit Class 4(2w) at EGSM900 and GSM850 power Class 1(1W) at DCS1800 and PCS 1900 GPRS GPRS multi-slot class 10 connectivity...
  • Page 9: Function

    4. Function EDW-310BB is able to be powered from 10V to 32V DC. The VIN,GND and ignition line of the vehicle port should be connected with the vehicle to use car management. The VIN line should be connected to +12V or +24V DC of vehicle parts using 2A fuse, for example the vehicle battery.
  • Page 10 The time interval can be preset by customer thru GPRS/SMS/UART config cable. 4.2 Alarm function EDW-310BB send alarm SMS/GPRS package to the predefined SMS number/IP address. The alarm package is able to be activated for following functions: Journey start/end alarm...
  • Page 11 . 4.6 Tank fuel detector function Connected with tank fuel level sensor,EDW-310BB can detect the fuel level of tank and send it to control center via GPRS. For more info about this function, please refer to document “how to use tank fuel level sensor “...
  • Page 12: Get Start

    000000. 5.1 Basic SMS Commands 5.1.1 Position Report To know the location of your EDW-310BB, send an SMS or make a telephone call directly to EDW-310BB and it will report its location by SMS. Command: W<password>,<000> Notes: The default password is 000000.
  • Page 13: Set Interval For Automatic Timed Report

    For more detailed SMS commands please go to Chapter 8 - SMS Command List 5.2 GPRS Settings by SMS Tracking via GPRS, you should set IP, Port and APN for EDW-310BB. Ensure that your SIM card in EDW-310BB supports GPRS connection prior to setting.
  • Page 14: Set Ip Address And Port

    EDW-310BB will reply with an SMS (like ‘Set APN Ok/CMNET’) to confirm this setting. 5.2.3 Set IP Address and Port Command: W<password>,012,IP,PORT Example: W000000,012,202.116.11.12,8000 EDW-310BB will then reply an SMS ( ‘Set IP Ok /202.116.11.12,8000’) to confirm this setting 5.2.4 Set Time Interval for Sending GPRS Packet Command: W<password>,014,time interval(in unit of 10 seconds)
  • Page 15: Trouble Shoot

    12/24V battery. 5.4 How to use external sensor 5.4.1 Connect external sensor with EDW-310BB 5.4.2 Control center send related command to tracker unit to set the parameter of using external sensor, such as time interval of taking photo of CCD camera.
  • Page 16 SMS format format The SIM in EDW-310BB has run Replace or top up the SIM card out of credit No SIM card Insert working SIM card. Check in phone that the SIM can send SMS message. SIM card has expired Check in phone that the SIM can send SMS message.
  • Page 17 7 SMS Command List (Remarks: ****** is user’s password, and the default password is 000000) Command Format Remark Get current location W******,000 Get current location of unit Get current location W******,001,****** ****** is old password ###### is new password Set interval for W******,002,XXX XXX is the interval in automatic timed report...
  • Page 18 alert Set over speed alert W******,005,XX XX (the preset value of speed) =00 , to turn off this function =[01, 20] (unit: 10Km/h) For example, W000000,005,08, it will sent alert when it is over 80Km/h Set Geo-fence alert W******,006,XX XX ( preset distance to original place ) =00, close =01, 30m...
  • Page 19 C=0, turn off the function to automatically hang up an incoming call. C=1, turn on the function to automatically hang up an incoming call after 4 - 5 rings. D=0, Turn off the function of sending an SMS when unit is turned D=1, Turn on the function of sending an SMS to SOS number...
  • Page 20 XX=01 sleep mode XX=02 deep sleep mode ### is the ending character Set power saving W******,026,XX XX=00, to turn off this mode when unit(GT60 function & EDW-310BB) is XX=01~99, to set this inactive function. It is in unit of...
  • Page 21 Example: If XX=10, EDW-310BB will enter power saving mode after it is immobile for 10 minutes. Set phone number for W******,030,T T is the telephone wiretapping(OPTIONAL number for wiretapping and max. 16 digits Set interval for W******,031,T X=0, to turn off this...

Table of Contents