The EDW-30T is a GPS/GPRS based personal tracking device, which is compact and easy to use. EDW-30T has inbuilt GPS module to obtain accurate position data and utilizes its GSM capability to send the position data to a specified mobile phone or server base to allow users to monitor people or pets using the tracker.
3 LED lights to show power, GPS, GSM and other status. Button 3 buttons(SOS/B/C) for making phone calls and sending SMS 4.Getting Started This section will describe how to set up your EDW-30T. 4.1 Hardware and Accessories EDW-30T is supplied in a box which includes: - 4 -...
Front View Side View Back View 4.3 Functional Parts Your EDW-30T has four buttons and three LEDs with three different colors to indicate the status of the unit. Red LED - indicating battery status Power is off or charging is complete Flashing (every 0.1 second)
4.4 First Use Please read this manual before using your EDW-30T. 4.4.1 Ensure that your EDW-30T has a working SIM card installed. - Check that the SIM has not run out of credit (Test the SIM in a phone to make sure it can send and receive SMS)
Check that the Red LED (Battery) is flashing 1 second on and 2 seconds off. Check that the Green LED (GSM) is flashing 0.1 second on and 2.9 seconds off. Check that the Blue LED (GPS) is flashing 0.1 second on and for 2.9 seconds off.
Description: Get the current location of the tracker, send this SMS or make a telephone call directly to the tracker and it will report its longitude and latitude by SMS with format as follows:- Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 2.6854Km/h, 2008-12-24,01:50 Example: W000000,000 - Track on Demand - Reply with a Google link...
Input the latitude and longitude that you receive from the tracker by SMS and click the search button. Google Earth or Google Maps will display the location for you. Example: When you receive: Latitude = 22 32 40.05N Longitude = 114 04 57.74E Type as the following picture shows: (Note: you should input the latitude and longitude as: 22 32 40.05N 114 04 57.74E) And then you can find the location of your tracker:...
Note: GPRS ID must not over 14 digits. Example: W000000,010,00001 7.6.2 Set APN Command: W******,011,APN,Username,Password Description: Set APN details for the tracker Note: 1. APN username and password are optional. If no APN username and password are required, just input APN only;...
The tracker will send every 600 seconds (10 minutes). For more information regarding GPRS tracking please refer to <GPRS Communication Protocol> 7.7 Track by GpsGate The EDW-30T supports GpsGate Software. Please contact us or GpsGate for more information of settings. 8. Authorization...
9.1 Receiving Phone Call Use your phone or mobile phone to call the tracker, the green LED will be on. Press SOS button to receive the incoming call or press Call B button to reject the call. 9.2 Making Phone Call After you have authorized phone numbers for SOS/Call B/Call C button, you can press one of these buttons to make a call to the preset phone number.
12.1 Movement Alarm Command: W******,006,XX Description: When the tracker moves out of a preset square scope, it will send an SMS alarm to the authorized phone number for SOS. Note: XX is the preset distance to the tracker’s original place =00, to turn off this function =01, 30m =02, 50m...
Description: Makes the tracker into power down mode when it is inactive for a period of time. In Power Down states, GPS stops working and GSM enters sleep and stop sending out message until it is activated by message, incoming calls or triggered by buttons. Note: XX=00, to turn off this function.
Annex 1. SMS Command List Note: ****** is user’s password and the default password is 000000. The tracker will only accept commands from a user with the correct password. Commands with wrong password will be ignored. Description SMS Command Example Track on Demand W******,000 W000000,000...
Page 16
=0 , to turn off this function =1, <3.3V =2 , <3.4V =3 , <3.5V (default) =4 , <3.6V =5 , <3.7V Speeding Alarm W******,005,XX W000000,005,08 Remarks: When the tracker speeds higher than the preset value, it will send an SMS to the authorized phone number for SOS. XX is the preset value of speed and in 2 digits.
Page 17
C=0, turn off the function to automatically hang up an incoming call. C=1, turn on the function to automatically hang up an incoming call after 4 - 5 rings. D=0, turn off the function of sending an SMS when the tracker is turned on. D=1, turn on the function of sending an SMS to the authorized phone number for SOS button when the tracker is turned on.
Page 18
XXXXX should be in five digits and in unit of 10 seconds. XXXXX=00000, to turn off this function; XXXXX=00001~65535, time interval for sending GPRS packet and in unit of 10 seconds. In this example, the tracker will send every 600 seconds (10 minutes). For more information regarding GPRS tracking please refer to <GPRS Communication Protocol>...
Problem: Unit will not reply with SMS Possible Cause: Resolution: Green LED is flashing (1 second on and 2 Make EDW-30T connected to GSM network. seconds off) GSM Network is slow Some GSM networks slow down during peak time or when they have equipment problems.
GPRS function of EDW-30T is turned off Turn on GPRS function of EDW-30T. Incorrect IP address or Port Get the right IP address and Port and reset to EDW-30T. GSM signal is weak Move the unit to a location with good GSM reception.
Need help?
Do you have a question about the EDW-30T and is the answer not in the manual?
Questions and answers