CARE AND MAINTENANCE
Your DM Sub is a sturdy and durable product and will provide years of reliable use if properly cared for. Use common
sense and read the safety warnings to avoid hazardous operating conditions.
The unit must be disconnected from the AC power source before any work is done on it. Refer all servicing to
qualified service personnel.
Avoid prolonged exposure to direct sunlight, as this may cause the unit to overheat and thermally shut off.
Excessively hot operating conditions can also cause a thermal shutdown.
Do not store in extremely hot or cold conditions or extremely high humidity. Always allow unit to come to room
temperature before use.
Never clean the DM Sub while plugged in or turned ON! When the unit has been fully disconnected from AC
power sources, use a dry cloth to remove soil or other dirt. Never use strong solvents on the DM Sub, as they
could damage the cabinet. Do not allow ANY fluids to drip inside the DM Sub.
For a touch-up of any damage to the black painted finish of the DM Sub, you can use a black spray paint such
as Peavey Commercial Sound, Black Touch-Up Paint, Peavey part number 00052110. Follow the directions on the
can for safety and best results.
CHECK FOR SECURE HARDWARE
After the first few weeks of use and periodically thereafter, check the hardware of the DM Sub for tightness,
including the rear panel screws and the screws that hold the grille and cabinet together.
The unit is subject to a great deal of vibration, and this could cause them to loosen with use.
Features and specifications are subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • ©2015 • 31700106