Table of Contents
Advertisement
Upgrading the EtherBridge Firmware
The Firmware Upgrade Utility is included with the installation of the
Configuration Utility.
1. Start the Upgrade Utility by clicking on Start, Programs, TROY
Group, EtherBridge, Firmware Upgrade Utility. After the Upgrade
Utility starts, it will search for all available EtherBridge adapters on
the network.
2. Select the EtherBridge adapter you want to upgrade. Enter the
password (the default password is access using all lower-case
letters), and then click on the Login button.
3. Enter the firmware file name and path (folder or directory location) in
the file entry field (e.g., C:\downloads\ethbg20.bin) or browse for the
firmware file by clicking the Open File button. The latest firmware
files can be found at http://www.troygroup.com.
NOTE: Firmware upgrades are not normally needed. Only upgrade the firmware
if you are experiencing difficulties with the EtherBridge adapter or have
been advised to do so by a TROY Technical Support representative.
4. Click on the Upgrade button to automatically load the file into the
flash-file memory area of the EtherBridge adapter. When the
upgrade process is complete, the message "Upgrade successful"
will appear on the screen, and then the Upgrade Utility will return to
the main screen. The EtherBridge adapter is now ready for normal
operation.
Document #40177-100 Rev. A
User's Guide
11
Advertisement
Table of Contents
