Fog Lamps; And Ltz) - Chevrolet Sonic 2015 Owner's Manual

6. Install the new bulb in the
headlamp assembly by turning
clockwise.
7. Reconnect the wiring harness
connector.
8. Install the headlamp bulb access
cover.
9. For the driver side bulb, replace
the windshield washer bottle
filler neck by turning it
one-quarter turn clockwise into
the bottle.
Parking/Turn Signal Lamp
1. Open the hood. See Hood on
page 10-4.
2. Remove the parking/turn signal
lamp bulb socket from the
headlamp assembly by turning
counterclockwise.
3. Remove the bulb from the bulb
socket by pulling it straight out.
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket into the
headlamp assembly by turning
clockwise.
I n f o r ma t i o n P r o v i d e d b y :
Vehicle Care
Fog Lamps (LS, LT,

and LTZ)

To replace the front fog lamp bulb:
1. Locate the fog lamp located
under the front fascia.
2. Disconnect the electrical
connector from the fog lamp bulb
assembly.
3. Remove the bulb by turning it
counterclockwise and pulling it
straight out of the assembly.
4. Install the new bulb by turning it
clockwise into the assembly.
5. Reconnect the electrical
connector.
10-29