Geemarc oCean400 Manual page 39

3. Press
press Select soft key.
4. The display shows the current security ID. Enter the
new one you want to use, press Save soft key.
After you have turned on " Auto turn on " and set the Pin
code, the following will happen:
If your phone rings 10 times without being answered, the
phone will set to auto off-hook (In this state, you can hear
the caller but cannot answer the call. Two "bip-bip"
tones will be generated to remind the caller to enter Pin
code (the default one is *0000) to enter full speaker state.
The caller enters the Pin code, and then starts the
conversation. Every 2 minutes later, the caller will hear a
prompt tone. The caller needs to press any button to
continue the conversation. Otherwise, the line will be
disconnected automatically.
NOTE: When the phone is auto off-hook, you can press
the key to enter full speaker state. In this way,
there is no need for caller to enter Pin code.
SETTINGS
or key to choose Security ID,
38