Geemarc oCean400 Manual page 31

Flash Time Setting
1. Press Menu soft key to display the main menu list.
2. Press the
then press Select soft key.
3. Press
Set Flash and then press Select soft key. The
display shows the current setting.
4. Press
among 100ms, 300ms and 600ms, press Select soft
key to confirm.
Dialing Mode Setting
1. Press Menu soft key to display the main menu list.
2. Press the
then press Select soft key.
3. Press
Dialing Mode and then press Select soft key. The
display shows the current setting.
4. Press
between Tone and Pulse, press Select soft key to
confirm.
Notes:

This menu is not used in countries where only Tone
dialing is available.

If you are not sure which dialing mode to select,
please contact your local service provider.
SETTINGS
key to move to Set Phone and
or key repeatedly to move to
or key repeatedly to choose
key to move to Set Phone and
or key repeatedly to move to
or key repeatedly to choose
30