Troubleshooting - ClearSounds A300 Operation Manual

4. Press up
press the Select soft key. If you select On, the display
asks you to enter the time in HH:MM.
5. Use the keypad to enter the time (If your time is set
to the 12 – Hour format, you will still need to enter the
time in the 24 – Hour format. Press the Next soft key.
6. The display shows Snooze On/Off. Press up
to select Snooze On or Snooze Off and then press
the Save soft key.
7. When the alarm sounds, press any key to switch it off. If
you have selected Snooze On, the alarm will ring every
11 minutes. To stop the snooze alarm, you must press
to prevent the snooze function from continuing. This
automatically switches the Snooze function to Snooze
Off. You will need to re-select Snooze On if you want to
turn that function back on for the next time the alarm is
set to go off.
█ Torch
If you turn this feature on, the visual phone ringer light will
remain lit and can be used as a light. To turn this feature on/
off, in standby mode, press and hold
on/off.

TROUBLESHOOTING

No dial tone
1. Check that all phone cord connections and AC adapter are
securely plugged into the phone, wall jack and electric
outlet.
2. Check that the handset batteries are installed properly and
are in full power (pages 13-14).
3. Check that the phone is in the correct dialing mode: tone or
pulse (page 23).
4. Plug another phone into the wall jack to make sure your
phone service is working.
or down
56 – ENGLISH
to select On or Off and then
until the light turns
or down