Advertisement
For installing or replacing the battery please proceed as follows:
1.
Pull the flap of the battery holder (15) backwards and take out the battery holder.
2.
Take the 9 V battery out of the battery holder (15) and pull off the battery clip (16) from
the depleted battery.
3.
Attach the battery clip (16) to the new battery (respecting the pole marking) and put it
into the battery holder (15). Make sure that the battery cable is not trapped.
4.
Insert the battery holder (15) into the unit and carefully press it down until it clicks into
place.
BDI-2000
Components and functions
15
Advertisement
