Advertisement
Components and functions
12
7 XLR OUT
XLR mounting plug output. Use an XLR cable to connect this output to an amplifier,
recording device or mixing console.
8 LEVEL
Adjusts the effect level.
9 GND LIFT
Ground potential switch. To eliminate hum noise caused by ground loops, use this
switch to disconnect the input signal ground potential from the ground potential
of the XLR output.
10 CONTOUR
Boosts treble and bass while lowering mids.
11 COLOR
Low-pass control to cut the high frequencies.
12 TREBLE, MIDDLE, BASS
Tone controls for high, mid and low frequencies.
active DI box
Advertisement
