Sony VX-14MW1U Service Manual page 50

NOTE:
Reassemble the FRONT LOADING MECHANISM in the reverse order. Confirm that the two bosses
on the left side of the CASSETTE HOLDER AS are inserted into the groove on the left side of the top
plate. Insert the two bosses on the right side of the cassette holder into the groove of the F/L
BRAKCET R (Fig. 3-6)
3-3. DRUM ASS'Y/EARTH BRACKET ASS'Y REMOVAL
a. Remove three screws
TOTAL ASSEMBLY.
b. Carefully lift the DRUM TOTAL ASSEMBLY
from the DECK MECHANISM, taking care not to
damage or touch the VIDEO HEAD.
NOTE:
After assembling the DRUM TOTAL
ASSEMBLY, confirm that the TAPE runs
smooth and refer to chapter 5
"ADJUSTMENT OF THE TAPE
TRANSPORTING SYSTEM".
When assembling the EARTH BRACKET
ASSEMBLY, a 3x12 screw should be
used and at the other parts, 3x10 screws
should be used.
TOP PLATE
fixing the DRUM
INSERT POINTS
(See Fig.3-7)
15
&