Technical Specification And Service Hints - Philips HDD1620 Service Manual

1.0 TECHNICAL SPECIFICATION and SERVICE HINTS

General
Dimensions (WxHxD) :
Weight :
Output power :
Frequency response :
Equalizer :
Hard disk :
Capacity :
Display :
Backlight :
Battery :
Battery life time:
File transfer rate using
USB2.0 :
Battery charging current
Maximum charging time :
Battery cutoff voltage:
Connections:
Battery level detection
Detection Level
4-step to 3-step voltage
3-step to 2-step voltage
2-step to 1-step voltage
Force Power Off voltage
Current consumption
DC-IN SUPPLY (4.5V)
Battery Charging Current
BATT. SUPPLY (3.7V)
Power Off
Idle
Playback without HDD reading
Playback with HDD reading
File transfer using USB2.0
Headphone out (headphone output load 2x16 ohm)
Maximum output power :
Frequency response :
SNR (A-wght) :
THD (1kHz) :
Left-Right Channel
Separation :
Left-Right Channel
Balance :
53.7 X 86.0 X 16.3 mm
(2.11 x 3.39 x 0.64 inch)
87 g
2 x 5 mW (16 Ohm)
20 – 16 000 Hs
5-bands
4GB – 6GB
128 x 128 pixels, 65K color
White
630 mAh Li-Ion
rechargeable battery
>16hrs
>4Mbyte
450mA
4hr
3.7V
Headphone Line Out Jack
Power Connector
Typ.
3.6 – 3.7V
3.53 – 3.6V
3.48 – 3.53V
<3.5V
450mA
300uA
30mA
30mA
345mA
350mA
10 mW
45Hz – 16kHz (16Ω load)
20Hz – 16kHz (15kΩ load)
85dB
0.1%
45dB typ. (1k Hz)
40dB typ. (20Hz – 16kHz)
<1.0dB (1k Hz)
<2.0dB (20Hz – 16kHz)
Supported playback format
MP3 :
WMA :
Sample rates :
ID3-tag support :
PC Connectivity :
File Transfer
via Windows Media Player 10 for music and picture
playback or Windows Explorer for general data (music
playback disabled)
Firmware and software upgrades
1. If you have not already installed the Device Manager
download the latest version of the Device Manager
from http://www.philips.com/support. You may need to
enter your language preference and the model number
e.g.HDD1630, to access the Device/Firmware Manager
upgrade file.
2. Download the zip file into a temp folder in your
computer. Unzip the file and then double click the
Setup.exe file to start the installation of the Device
Manager.
3. Once the installation is complete, connect the GoGear
to the power supply with the AC/DC adapter.
4. Make sure all other applications such as Philips Device
plug-in, Windows Media Player or Windows Explorer
that accessing the device are closed or else Device
Manager will not recognize the device. Launch the
Philips Device Manager
>Philips Device Manager->Philips Device Manager
on your PC.
5. Click Update
the Philips Device Manager will detect the connection
of your GoGear and the application will automatically
check on the server to see if an update is available and
prompt user to download the updated firmware. Click
YES to start
8 - 320 Kbps and VBR
32 - 192 Kbps
8, 11.025, 16, 22.050
32, 44.1, 48
Yes
USB
at Start->Programs-
in the dialogue
the downloading.
box