Kia Rio 2008 Manual page 111

Knowing your vehicle
1. AUDIO/MP3 CD Select Button
• Insert the CD with the label facing
upward.
• Insert the CD to start CD playback,
during radio operation or cassette tape
playing.
• If you press the CD button while a disc
is in the CD deck, the CD player will
begin playing even if the radio or cas-
sette player is being used.
• The CD player can be used when the
ignition switch is in either the "ON" or
"ACC" position.
• Push the CD button to turn on that
function without pushing Power ON-
OFF control knob.
✽ ✽ NOTICE
• Do not stick paper or tape etc., on the
label side or the recording side of any
discs, as it may cause a malfunction.
• The unit can play a multi-session CD-
R (recordable CD) and CD-RW
(rewritable CD) that consists of more
than two sessions.
Please refer to the manual of CD-
R/CD-RW recorder or CD-R/CD-RW
software for more information on
finalization process.
3 100
(Continued)
• Depending on the recording status,
some CD-Rs/CD-RWs may not be
played on this unit.
✽ ✽ NOTICE
Playback of MP3, AAC and WMA file
formats are supported. Load to play
time for these formats may be longer
due to the compressed nature of these
discs.
2. TRACK UP/DOWN Button
• The desired track on the disc currently
being played can be selected using the
track number.
• Press button once to skip forward to
the beginning of the next track.
Press
back begins to quickly move backward
through a CD.
If you press
ond, it will take you to the beginning of
the file you are now listening to.
3. FF/REW Button
If you want to fast forward or reverse
through the compact disc track, push and
hold the FF or REW button.
(Continued)
When you release the button, the com-
pact disc player will resume playing.
within a second after play-
after more than a sec-
4. REPEAT (RPT) Button
• To repeat the track you are currently
listening to, press the RPT button. To
cancel, press it again.
• To repeat the music within selected
folder, press the RPT button for more
than 0.8 second. To cancel, press it
again. (MP3 CD only)
• If you do not release RPT operation
when the track ends, it will automati-
cally be replayed.
This process will be continued until you
push the button again or power
ON/OFF.
5. RANDOM (RDM) Button
• Press the RDM button to listen to
recorded tracks in random sequence.
Press RDM again to cancel or turn the
audio unit OFF then ON.
defaults to playing tracks in sequential
order.
• To listen the music within the selected
folder in random order, press the RDM
button within a second.
press it again or power ON/OFF.(MP3
CD only)
The unit
To cancel,