Calibration Result Message - LG U8130 Service Manual

8. CALIBRATION
C. Calibration Start Using XCALMON
If you want to calibrate U8130 mobile phone, click the calibration icon "C".
And then you will see the calibration tree window like Figure7-6.
To start calibration, you should select "Calibration" item and push "F4" button in your keyboard.
D. Verification of calibration result
If the calibration will be ended, you will see several message window and the result of calibration
through OUTPUT & STATUS tab view.
The detail explanation of those will be described in chapter 7.4.4

8.4.4 Calibration Result Message

If the calibration is over without error, "PASS" message window will show up like Figure7-13. On the
contrary, if the calibration is over with some error, "FAIL" message window will show up like Figure7-14.
Additionally, in all of the cases, it is possible to check the calibration result with OUTPUT & STATUS
tab view.
Figure 8-13. Calibration PASS Message Window
- 232 -