Subscribe to Our Youtube Channel
Related Manuals for Hydro-Force Brush Pro 17
Summary of Contents for Hydro-Force Brush Pro 17
- Page 1 Brush Pro Carpet Cleaning Machine and Pile Lift er Operator’s Manual HYDRO-FORCE Please read the Operator’s Manual com- pletely before using the Brush Pro, and pay close attention to the safety advice.
- Page 3 INSTRUCTIONS Your Brush Pro 17 carpet cleaning machine is designed to give you excellent performance and satisfaction throughout its life. Reading this manual will help you get the most from its features and capabilities. ASSEMBLY In the shipping box you will fi nd the machine base (shipped with two stan- dard brushes installed), dirt receptacles, dust covers and two or three pieces to make the hanle.
-
Page 4: Cleaning And Maintenance
Rotate brushes every 2-3 hours of operation. (Prolongs brush life and protects against gear damage.) 2 Place the Brush Pro 17 machine on storage tray/trol- ley or lay the machine on its side when not in use to prevent brush damage. -
Page 5: Troubleshooting
TROUBLESHOOTING PROBLEM SOLUTION Q Machine does not start and makes NO noise. A Wait 30 seconds if the machine is warm. Push the motor protector reset button (on the side of the machine). Use a small object, like a pencil, to be sure to press it in far enough. - Page 6 BRUSH PRO 17 — SCHEMATIC...
- Page 7 BRUSH PRO 17 — MACHINE HANDLE & TROLLEY...
- Page 8 BRUSH PRO 17 — SCHEMATIC VIEWS...
- Page 9 Gear cover rectly prior to connecting the machine to the power supply. Lock washer M 5 • Do not run the Brush Pro 17 machine over loose carpet fi bers or edges of Gear 66 right rugs or carpet matting.
Need help?
Do you have a question about the Brush Pro 17 and is the answer not in the manual?
Questions and answers