Your Black & Decker charger (sound pressure) dB(A) has been designed for charging Black & Decker (acoustic power) dB(A) batteries of the type supplied with this tool. HP146F2K HP148F2K HP188F2K SAFETY INSTRUCTIONS (sound pressure) dB(A) 86.5 (acoustic power) dB(A) 99.5...
E N G L I S H Know your tool 8. Secure workpiece Use clamps or a vice to hold the workpiece. Warning! When using battery-powered It is safer and it frees both hands to operate tools, basic safety precautions, the tool.
E N G L I S H 16. Store idle tools Neutralise with a mild acid such as lemon When not in use, tools, batteries and chargers juice or vinegar. In case of eye contact, should be stored in a dry, locked up or high rinse abundantly with clean water for at place, out of reach of children.
E N G L I S H Mains plug replacement (U.K. & Ireland only) 8. Side handle (HP188F2) 9. Battery 10. Battery release button 11. Charger 12. Charging indicator 13. End of charge indicator ASSEMBLY Fitting and removing the battery (fig. B) Should your mains plug need replacing and To fit the battery (9), line it up with the you are competent to do this, proceed as...
E N G L I S H To remove the chuck (4), keep the release tabs To charge the battery (9), remove it from the (18) depressed and pull the chuck off the tool and insert it into the charger (11). spindle (19).
E N G L I S H Large screws and hard workpiece materials require a Use spade bits when drilling large diameter higher torque setting than small screws and soft holes in wood. workpiece materials. The collar has a wide range of Use HSS drill bits when drilling in metal.
E N G L I S H The product has been used for trade, professional or hire purposes; The product has been subjected to misuse or neglect; The product has sustained damage through foreign objects, substances or accidents; Repairs have been attempted by persons other than authorised repair agents or Black &...