Roundshot VR Drive Metric Instruction Manual page 11

1.4 Setting up the computer and activating FOVEX PanoMaker (continued)
1.4.2 Activating FOVEX PanoMaker
After installing FOVEX PanoMaker on the computer, open the software and activate
it with the customer identification key supplied with your VR Drive Metric.
We deliver every VR Drive Metric with a unique customer identification key (CID). If you
possess several VR Drive Metric units and would like to group them under one only CID,
please contact us by email.
Instruction Manual Roundshot VR Drive Metric – April 2015 – © by Seitz Phototechnik AG / Switzerland www.roundshot.com
Go to "Help / Register product"
When registering the product for the first time,
a blank page is displayed.
Press "Update License"
Enter the customer identification key that has
been provided with the purchase of your VR Drive
Metric.
The software connects with the FOVEX server and
loads the Hardware IDs of the VR Drive Metric
devices that are linked to the unique customer key.
These Hardware IDs are provided in a list.
At the same time, the software downloads the
calibration files corresponding to the VR Drive
Metric hardware. These calibration files are
automatically applied when stitching images.
page 10