Wcdma Call Processing; Hardware Requirements; Software Requirements; Call Origination (Wcdma) - Motorola V975 Service Manual

Manual Test Procdures

WCDMA Call Processing

WCDMA Call Processing
In order to successfully complete a GSM call process-
ing procedure, a test USIM card needs to be available.
Test USIM cards have default call parameters that al-
low users to perform call processing tests through GSM
base station simulators. This allows service technicians
perform simulations without accessing the customer's
cellular account.

Hardware Requirements

Refer to , "Hardware requirements," under, "GSM/
DCS/PCS Call Processing." Also Refer to Figure 2-5.

Software Requirements

None.

Call Origination (WCDMA)

Use the following procedures for call processing. The
screen shots are from a Rohde and Schwarz CMU 200
with WCDMA signaling options installed. The proce-
dures can be adopted to any other test box that will be
used to perform call processing.
1. Install the test USIM in phone.
2. Connect hardware as illustrated in figure 4.
Note: Control interface doesn't need to be con-
nected at this time.
2-6
Motorola Confidential Proprietary
Figure 2-6. WCDMA Signalling Setup
Band
WCDMA
Ch. 1
FDD
I
Ch. 2
Menu Select
Selection
GSM Mobile Station(GSM 1800/Signalling/Overview/P/t Normal GMSK
Basic Functions Non-Signalling
GSM Mobile Station Signalling
GSM 850
GSM 900
GSM 1800
GSM 1900
3G UMTS User Equipment
WCDMA FDD
Menu
Select
3. Setup up the test box for WCDMA FDD Sig-
naling
4. Set UE Signal, RF Channel Uplink to 9400
5. Set UE Signal, RF Channel Downlink to 9800
Figure 2-7. Channel Uplink(UE Signal)
WCDMA Connection Control
FDD
Setup
Default All Settings
Analyzer Settings
RF Channel Uplink Band [|]
Frequency Offset
RX/TX Separation
Measurement Settings
Default Settings
UL Scrambling Code
Analysis Mode
Sync. Mode
Measurement Slot Number
Correlatoin Mode
Threshold
UE Power Control
Default Settings
Connection UE Signal BS Signal
6. Set TPC Pattern Type to All 1
V975/V980/C975/C980
Spectrum
Hotkeys - Set 1
RF
Power
Analyzer/Generator
Spectrum
AUDIO
Analyzer/Generator
GSM 850
Analyzer/Generator
P/t Normal GMSK
GSM 850
Overview
P/t Normal GMSK
GSM 850
Analyzer/Generator
P/t Normal GMSK
GSM 850
Overview
P/t Normal GMSK
HotKeys HotKeys HotKeys
Set 1 Set 2 Set 3
Signal On
Analyzer Settings/RF Channel Uplink
Channel Frequency Downlink
9750 1922.4 2112.4
MHz MHz
+ 0.000
kHz
190.000
MHz
0
With Origin Offset
All Slots
0
DPCCH
- 25
dB
Network RF Sync.
Draft 1.0
Connect
Control
HotKeys
Assign.
1 2