Table of Contents
Advertisement
6. Handset (Phone) change confirmation window
The above window appears when "Settings" is clicked on the main window. Before changing handsets (phones), specify whether to initialise the
handset (phone) or not. After initialisation or handset (phone) change, make communication settings again.
[User action]
1) Click "Yes" to initialise the handset (phone) and make communication settings again.
•
Click "No" to turn off the handset (phone) and make communication settings again.
•
Click "Cancel" not to make communication settings.
•
When "Yes" is clicked, initialisation starts and the connection confirmation window appears. Now, disconnect the handset (phone) and the
PC, and connect another handset (phone).
•
When "No" is clicked, the handset (phone) turns off and the connection confirmation window appears. Now, disconnect the handset (phone)
and the PC, and connect another handset (phone).
•
When this application is finished, the SPST function selection screen returns.
4.3.3 SHInfoView
1) Function
Handset (Phone) information appears on the screen.
•
Displayed information:
IMEI
Software version
Country code
Provider name
* For a screen example, refer to "Appendix 1: Handset (Phone) information".
•
Batteries can be used to power handsets (phones), however, we recommend that you use chargers.
2) Operation
* The initial setting file and the option file are created during the start-up process if they do not exist.
CONFIDENTIAL
Figure 23
Stop
Start
Option
Figure 24
2 – 13
902SH
Advertisement
Table of Contents
