Download Print this page

Elvox 46316.210A Installation And Operation Manual page 2

Hd-sdi full hd bullet ir camera, 2.8-10mm lens

Advertisement

6. Collegamento dei cavi
SDI
Power (+) Segnale video
Signale SDI
Video BNC
(giallo)
POWER
Power (-) GND Video
SDI GND
(rosso)
POWER VIDEO hD SDI
(12Vdc)
RS485
Sorveglianza HD (Alta definizione)
La telecamera HD-SDI offre eccellenti prestazioni di sorveglianza rispetto a una normale
telecamera VGA.
1.3M 1280x1024
1.3M 1280x1024
1.3M 1280x1024
16:9 HD1280x720
1.3M 1280x1024
16:9 HD1280x720
SVGA 800x600
2M 1920(H)x1080(V)
16:9 HD1280x720
SVGA 800x600
16:9 HD1280x720
2M 1920(H)x1080(V)
SVGA 800x600
2M 1920(H)x1080(V)
SVGA 800x600
2M 1920(H)x1080(V)
1.3M 1280x1024
Svitare la vite per agire con
focus e zoom. Riavvitare
16:9 HD1280x720
dopo la regolazione.
SVGA 800x600
2M 1920(H)x1080(V)
7. Collegamento della telecamera
Staffa
Schermo solare
LED IR
Obiettivo varifocale
Cavo
diaframma auto DC
Custodia
7
|
(2.8mm-12mm)
Digital Video Security Systems
Controllo OSD
7
Sensore CDS
7
|
Digital Video Security Systems
Controllo messa a fuoco
|
Digital Video Security Systems
7
|
Digital Video Security Systems
I
7
|
Digital Video Security Systems
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
ISO14001
Il simbolo della freccia a forma di fulmine inserito in un triangolo equilatero serve ad
avvertire l'utente della presenza di tensione elettrica pericolosa non isolata, all'interno
del contenitore del prodotto, che può essere di intensità tale da costituire pericolo di
scossa elettrica per le persone.
Il simbolo del triangolo con il punto esclamativo serve ad avvisare l'utente della
presenza di importanti istruzioni di funzionamento e manutenzione (assistenza) nella
documentazione che accompagna il dispositivo.
INFORMAZIONI: Questo apparecchio è stato testato ed è risultato conforme ai limiti
stabiliti per i dispositivi digitali di Classe A, ai sensi della Parte 15 degli standard FCC e
CE.
Questi limiti sono progettati per offrire protezione adeguata contro le interferenze
dannose quando l'apparecchiatura è utilizzata in un ambiente commerciale.
L'attrezzatura genera, utilizza e può irradiare frequenze radio e, se non installata e
utilizzata secondo il manuale di istruzioni, può provocare interferenze dannose alle
comunicazioni radio.
L'utilizzo di questa attrezzatura in aree residenziali può causare interferenze dannose
che l'utente potrebbe dover correggere a proprie spese.
AVVERTENZE: I cambiamenti o le modifiche non espressamente approvati dal
costruttore potrebbero invalidare il diritto dell'utente a utilizzare l'apparecchiatura.
ATTENZIONE: Per evitare il rischio di scosse elettriche e incendi:
NON utilizzare fonti di alimentazione diverse da quelle specificate.
L'installazione deve essere effettuata da un tecnico qualificato e deve essere
conforme a tutte le normative locali.
I
8. Imballo
CAVO VIDEO
TELECAMERA
MANUALE DELLE
1EA
ISTRUZIONI
1EA
ADATTATORE BASE 1EA
BRUGOLA
VITE A ESAGONO INCASSATO
1EA
VITE
TASSELLO
CHIAVE PER REGOLARE
4EA
4EA
LA MESSA A FUOCO
8
|
Digital Video Security Systems
8
8
|
Digital Video Security Systems
|
Digital Video Security Systems
8
|
Digital Video Security Systems
I
8
|
Digital Video Security Systems
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
1. Precautions
100
210
Do not install or use the camera in an
Do not install the camera under
Do not install the camera in extreme
environment where the humidity is high.
unstable lighting conditions.
temperature conditions.
4 5
Do not install or use the camera in an
Only use the camera under conditions
Severe lighting change or flicker can
environment where the humidity is high.
where temperatures are between -10°C
cause the camera to work improperly.
and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
Do not touch the front lens of the
Never keep the camera pointed directly
Do not drop the camera or subject it to
camera.
at strong light.
physical shocks.
This is one of the most important parts of
It can cause malfunctions to occur.
housing damage can compromise
the camera. Be careful not to leave
weatherproof ratings.
fingerprints on the lens cover.
Do not expose the camera to rain or
Do not expose the camera to
spill liquids on it.
radioactivity.
* If the camera is exposed
to spotlight or object
reflecting strong light,
5
|
Digital Video Security Systems
smear or blooming may
occur.
* please check that the
power satisfies the normal
specification before
If it gets wet, wipe dry immediately.
If exposed to radioactivity the CCD will fail.
connecting the camera.
Liquids can contain minerals that corrode
the electronic components.
EN
CAUTION
RISK OF ELECTRIC SHOCK
2. Safety Instructions
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Precautions for use
ISO14001
• This camera should be installed by qualified personnel only
• There are no user serviceable parts inside
• Do not disassemble this camera other than to make initial adjustments
• Use a UL approved regulated 12 volt DC power supply
• Use appropriate low voltage power cable to prevent fire or electrical shock
• Please insure that your installation area can support the weight of the camera
1EA
Please handle this camera carefully
• Do not use a strong or abrasive detergent when cleaning the camera
• Do not expose the camera to direct sun
• Do not install camera in places where humidity is high
• Do not install near cooling or heating device
4EA
• Do not expose camera to rain or moisture
1EA
5. Specifications
MODEL
Image Sensor
1/3" PANASONIC 2.1Mega CMOS Sensor
Effective Pixels
1944(H) X 1092(V), 2.12M Pixels
Total pixels
2010(H) X 1108(V), 2.22M Pixels
Scanning System
Progressive Scan
4 5
S/N Ratio
More than 50dB
Resolution
1080P_Full-hD
Frame Rate
NTSC 30P/60I/60P , PAL 25P/50I/50P
Video Output
1.0Vp-p Composite. 75 Ohms
Minimum Illumination
0Lux(IR LED ON)
OSD
Built-in
BLC
OFF / BLC
HSBLC
OFF / HSBLC
White Balance
ATW / AWC, Set / Manual /AWB
Shutter Speed
AUTO /FLK/ 1/60Sec ~ 1/50000Sec, x2, x4, x6, x8, x10, x15, x20,x25, x30
Sense-Up
(x2 ~ x30)
AGC
0~15(Level Adjustable)
Digital Noise Reduction
2D, 3DNR (Smart-NR)
WDR(Wide Dynamic Range)
ON / OFF (Low,Middle,High)
De-Fog
O (Position, Area Ajustable)
ACCE
OFF / ON
Motion
ON / OFF (4 Area)
Privacy
ON / OFF (8 Area)
Mirror
MIRROR,V-FLIP, ROTATE
Freeze
ON / OFF
Sharpness
0~15(Level Adjustable)
Day&Night
AUTO/ COLOR / B/W / EXT
D-Zoom
(x2 ~ x62)
Smart D-Zoom
(2 Area)
NOTE
Defect
Live DPC / Static DPC (2048EA)
Lens Shading(LSC)
SCAN
Smart-IR
ON / OFF
RS-485(Protocol)
YES
Coaxial Communication (UTC)
MODE1 / MODE2
Language
ENG/ARB/HEB/TUR/NED/POR/RUS/POL/SPA/ITA/FRA/GER/KOR/CHN1/CHA2/JPN
Power
DC 12V
Power Consumption
IR LED ON:700mA Max
Lens
DC Auto Iris Varifocal Lens (2.8mm-10mm)
Operating Temperature
-10 ~ +50 Deg C. RH 95% Max.
Storage Temperature
-20 ~ +60 Deg C. RH 95% Max.
Dimension(W x h x D)
100mm(W) * 100mm(H) * 210mm(D)
Weight
1400g
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
3. Dimension
100
100
4. Key Features
• 1/3" PANASONIC 2.1 Mega CMOS Sensor
• High Resolution : 1080P Full-HD
• Privacy masking (8 Area)
• TV Out (BNC) With NTSC / PAL Selectable
• Dual Output-Megapixel HD CCTV (8NC) & SD CCTV (BNC) Out
• High resolution Digital Zoom (x62)
• True Day/Night with ICR
• Flicker suppression
• No noise, Ghosting Effect With DNR
• Power DC 12V
• IP Rate: IP67
EN
6. Cable Connection
46316.210A
HD (High Definition) Surveillance
hD-SDI Camera provides the superb surveillance conditions than normal VGA camera.
SVGA 800x600
SVGA 800x600
SVGA 800x600
7. Camera Connection
DC Auto Iris Varifocal
Lens (2.8mm-12mm)
7
|
EN
210
100
210
100
210
210
4 5
4 5
100
210
EN
SDI
Power (+) Video Signal
SDI Signal
Video BNC
(yellow)
POWER
Power (-) Video GND
SDI GND
(red)
POWER VIDEO
hD SDI
(12Vdc)
RS485
DC
1.3M 1280x1024
ELC
1.3M 1280x1024
1.3M 1280x1024
1.3M 1280x1024
16:9 HD1280x720
16:9 HD1280x720
16:9 HD1280x720
2M 1920(H)x1080(V)
16:9 HD1280x720
2M 1920(H)x1080(V)
SVGA 800x600
2M 1920(H)x1080(V)
2M 1920(H)x1080(V)
1.3M 1280x1024
Unscrew the screw to act
with focus and zoom.
16:9 HD1280x720
Screw after adjustment.
SVGA 800x600
2M 1920(H)x1080(V)
Bracket
Sunshield
IR LED
Cable
Case
Digital Video Security Systems
OSD Control
7
|
7
CDS Sensor
Digital Video Security Systems
|
Focus Control
7
Digital Video Security Systems
|
Digital Video Security Systems
7
|
Digital Video Security Systems
EN
7
|
Digital Video Security Systems

Advertisement

loading