Manual
1
Safety instructions
➪
When the camera is mounted, the clamping screw of the
Video 60 Plus EFP must only be released if camera and tri-
pod are secured against falling over.
➪
When placing the camera plate into the Video 60 Plus EFP,
make sure not to hold fingers within the range of the locking
lever, since it will snap back.
➪
When releasing the vertical brake make sure that the came-
ra is secured against any sudden movement.
➪
Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
➪
Before transport reset fluid damping to "0"
2
Operating elements
lock of the sliding balance plate
horizontal brake
horizontal setting of
fluid damping
flange for viewfinder extension
- 13 -
Video 60 Plus EFP
safety lock of
Touch & Go system
rosette for moun-
ting pan bar
counterbalance knob
Touch Bubble
clamping screw of the
fluid head