Pinpoint Retuning; Menu/Quick-Switch; Plus And Minus; Operation And Controls - Omega 8500 Owner's Manual

OPERATION and CONTROLS (continued)
Retuning in Pinpoint Mode is useful in narrowing down the location of a target.

PINPOINT RETUNING

To retune the detector, release the button and immediately depress it again.
1. To Narrow the response further, position the center of the searchcoil slightly
off the center of the target, while still depressing
2. Release
3. Immediately press-and-hold again.
4. Repeat this procedure to narrow the field of detection further.
Note: Depth indication is less accurate after narrowing.
This double function touchpad is used to activate and navigate the menu and to

MENU/QUICK-SWITCH

momentarily change modes. To operate the Menu, firmly press and release the
touchpad. Note that the Menu actuates on the release of the touchpad. Press
and Hold to momentarily switch modes.
MENU. The menu system packs the feature set in a dynamic and intuitive
fashion. It also has extended hidden features for the advanced user.
Access: Press and release
QUICK SWITCH. Quick Switch alternates between ALL METAL and
DISCRIMINATION Modes. It is useful when trying to listen a deeper target, or
when trying to pinpoint the target without using the static signal.
Access: Press and hold
METAL Modes
Use and to modify and adjust the active menu item. Press and release once

PLUS and MINUS

to modify menu items, or press and hold for continuous adjustment.
14
.
, to enable menu items.
to alternate between DISCRIMINATION and ALL