Using The Wireless Headphones; Replacing The Headphone Batteries; Using External Sources - Rosen AV7950H Owner's Manual

AV7950H Owner's Manual

Using The Wireless Headphones

The system comes with infrared (IR) 2 channel wireless fold-flat
headphones. These headphones receive a signal from an IR transmit-
ter built into the unit. Headphones allow rear-seat passengers to listen
without using the vehicle speakers.
To turn the headphones on and off, push the Power ON/OFF button on
the earpiece. The Power LED on the earpiece indicates when head-
phone power is on. Power turns off automatically after three minutes of
no audio, in order to preserve battery life.
The headphones have a two-position slide switch labeled "A/B." When
the switch is in the "A" position, the headphones play audio from the
source designated as "A." When the switch is in the "B" position, the
headphones play audio from the source designated as "B."
To adjust the headphone volume, rotate the thumb wheel on the head-
phones.
Adjust headphones
here
A/B Switch
Volume
Batteries
16
On/Off

Replacing The Headphone Batteries

The wireless IR headphones require two (2) "AAA" batteries. To
replace the batteries, slide off the battery compartment door on the left
earpiece and insert batteries, as shown. Make certain that the battery
orientation matches the marks inside the battery compartment.

Using External Sources

You may use optional external video games, camcorders, and other
portable video units by connecting the unit to the auxiliary RCA input
jacks on the unit.
To use an external game system, a 12VDC to 110VAC power inverter,
available at most electronic retail stores, is often required.
Note: If you want to watch non-widescreen, 4:3 images, press
the DISPLAY button on the remote control until "STANDARD"
is displayed on the screen. This will properly size the image,
instead of stretching the image across the wide screen. In
"STANDARD" mode, you will see black bars on the sides of the
image.