Summary of Contents for Listen Technologies LA-261
Page 3
Dear Valued Customer, Thank you for choosing Listen! All of us at Listen are dedicated to providing you with the highest quality products available. We take great pride in their outstanding performance because we care that you are completely satisfied. That’s why we independently certify them to the highest quality standards and back them with a limited lifetime guarantee.
(located inside the front cover of the LT-700) is set to the sensitivity specified for your microphone. If this switch is not in the correct position, your audio may sound low or distorted. Please note the sensitivity setting for your microphone and check the switch setting in the LT-700 prior to using your Listen equipment.
LA-261 The LA-261 has an omni-directional pickup pattern. This means that audio from a broader area can be picked up by the microphone element. The main advantage of this type of microphone is that it does not have to be oriented directly towards your mouth for good audio pickup.
Display Transmitter) to the MED position. •Place the unit over your head and position the microphone as close as possible to your mouth. For best results the mic element should be 1 to 2 inches from your mouth. This will help to ensure that the microphone picks up your voice rather than room noise.
For best results the mic element should be 1 to 2 inches from your mouth. This will help to ensure that the microphone picks up your voice rather than room noise. •Connect the plug firmly to the microphone jack on the LT-700.
The LA-272 has a uni-directional pickup pattern. This means that the microphone’s element must be oriented towards your mouth. It will not pick up audio very well from the side of the microphone. The main advantage of this type of microphone is that it helps minimize feedback and picks up less environmental noise.
•Connect the microphone plug firmly to the microphone jack on the LT-700. •To use, slide the switch on the side of the microphone to the ON position (toward the mic element). For best results the mic element should be no more than 6 inches from your mouth.
Transmitter) to the HI position. •Connect the microphone plug firmly to the microphone jack on the LT-700. •Place the collar ring around your neck and position the microphone so that it is in front of your LA-278 mouth and as close to your mouth as possible without rubbing on your face or clothing. For best results the mic element should be 1 to 2 inches from your mouth.
•Place the unit on the table, clear of any obstructions that might interfere with its pick up of voices. For best quality, users should be as close to the microphone as possible (the ideal range is 2 to 3 feet). The closer you are to the microphone, the better it will sound. LA-277...
The LA-278 has a uni-directional pickup pattern. This means that the microphone’s element must be oriented towards your mouth. It will not pick up audio very well from the side of the microphone. The main advantage of this type of microphone is that it helps minimize feedback and picks up less environmental noise.
Display Transmitter) to the MED position. •Place the unit over your ear and position the microphone as close as possible to your mouth. For best results the mic element should be 1 to 2 inches from your mouth. This will help to ensure that the microphone picks up your voice rather than room noise.
My microphone audio sounds distorted or “fuzzy”. Make sure the Mic Sensitivity Switch (inside cover of LT-700) is set to the correct position for your microphone. Make sure you are speaking in a normal voice. If you speak too loudly, your audio will be distorted.
Warranty & Contacting Listen Listen Technologies Corporation (Listen) warrants its transmitters and receivers (LT-82, LT-700, LT-800, LR-100, LR-42, LR-44, LR-300, LR-400, LR-500, LR-600) to be free from defects in workmanship and material under normal use and conditions for the useful lifetime of the product from date of purchase.
This cable makes it easy to use a line level source (such as a CD player) along with your microphone. It provides one 3.5 mm male jack, and splits to one RCA phono connector (line input to LT-700) and one 3.5mm female connector (Mic input to LT-700).
Need help?
Do you have a question about the LA-261 and is the answer not in the manual?
Questions and answers