DCN-NG Pluggable Microphone
Specify Part
Number
DCN-MICS
DCN-MICL
Features
•
Unidirectional microphone
•
Adjustable stem
•
Combines high acoustic quality and good sensitivity with low sensitivity
•
Built-in plop and windshield
•
Slim and attractive design
•
Fast and reliable connection is assured via the 6-pole connector
•
Low susceptibility to cell phones
•
2 color mic ring indicator, red (mic on), green (request to speak)
Specifications
Controls and Indicators
Interconnection
Performance
Sensitivity
Frequency response
Transducer type
Directional pattern
Equivalent noise level
SNR
Physical characteristics
Stem length
Weight
Mounting
Color
L i s t e n Te c h n o l o g i e s C o r p o r a t i o n
8535 South 700 West, Suite A
Sandy, UT 84070-2515 U.S.A.
Phone: 1.801.233.8992 or 1.800.330.0891
Fax: 1.801.233.8995
Email: info@ListenTech.com
updated 06.24.05
The DCN-MICS and DCN-MICL are unidirectional microphones
with an adjustable stem for use with DCN-IDESK-L Interpreter
desk, Concentus and flush mount units.
Using a clamp on floor or table stand. Red light emitting light ring around
the microphone head
6-pole connector
Nominal level at 85 dB SPL, max level 110 db SPL at < 3% THD
100 Hz – 16 kHz
electret
cardiod
24 dB (A)
60 dB
DCN-MICS 12.2 in. (310 mm), DCN-MICL 18.9 in. (480 mm)
DCN-MICS 0.24 lbs. (110 g), DCN-MICL 0.28 lbs. (125 g)
6-pole mini XLR connector
Silver
Don' t miss a single sou nd.
Listen
®
and the Listen logo are registered trademarks of Listen Technologies Corporation
shown installed
in DCN-IDESK-D