IMPORTANT INFORMATION
E.1
E.1.1
Safety
Never point the gun at yourself or anybody else and hold it with both hands when spraying. A high-
pressure spray can penetrate the skin causing serious injury.
Before service work, always disconnect the air supply.
When cleaning, it is strongly advisable to use protective goggles, wear protective gloves and protective
clothing.
Never spray electrical equipment or cables unless you are sure that the installation stands high-pressure
cleaning.
Be sure that any part to be fitted withstands the pressure.
If the cleaning unit is to be used in a hazardous environment, earthing the equipment will eliminate
static electricity.
Airclean is CE-marked.
E.1.2
Lubrication
The air motor requires lubricated air. In order to ensure uninterrupted steady operation you must never
let the fitted air lubricator run dry. The correct position of the adjustment screw is approx. 1/2-1 turn.
E.1.3
Air operating pressure
Do not exceed maximum safe air operating pressure specified in data sheet, enclosure 1.
E.1.4
Frost protection
If frost is expected, the waterside must be emptied to prevent damage by frost. This is simple. Discon-
nect the water supply and let the unit run some strokes until the pump, hose, spray gun and extension
tube is empty. Or change over the air supply to the water intake and blow the waterside dry.
E.1.5
Guarantee
The guarantee is not valid for damages caused by erroneous usage or if the unit has been disassembled
without written permission from the manufacturer.
3