Troubleshooting; Specification - Hyundai H-CSX10A Instruction Manual

Troubleshooting

No sound
The amplifier can not be
switched on
Abnormal distorted sound

Specification

Output power
RMS
Sensitivity
Variable low pass
THD
Input level
Power source
Frequency response
Bass Boost
Phase
Fuse rating
Dimensions
Weight
The LED indicator is not
illuminated.
Short cut.
Grounding is wrong.
No signal input.
The volume is minimum.
There is no power to "REM"
jack when the radio is on.
The fuse has blown.
Input control level is too high.
500 W (Peak)
150 W @ 4 Ohm @ 100 Hz
91 dB
50 – 150 Hz
<0.4%
110 mV (RCA-Line-In), 0.5 V (Speaker input)
DC 10 - 14,4 V Negative ground
Input: 35 – 150 Hz
0 - 12 dB @ 45 Hz
0º/180º
25
400 x 310 x 240 mm
9.92 kg
Check fuse in amplifier.
Verify connections are correct.
Verify that there are no short
cut.
Verify for proper grounding.
Check if the audio cable is
connected.
Adjust the volume level.
Check connections to radio.
Verify and replace blown fuse.
Adjust input LEVEL control.
6