IC’s etc.) is subject to the terms and conditions of Spansion LLC and its affiliates (“SPANSION”) as set out below and in (i) the terms and conditions of the License Agreement and/or the Sale and Purchase Agreement and/or any other agreement under which deliverables have been delivered, (ii) the technical descriptions and (iii) all accompanying written materials.
Page 4
5. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect. The contents of this document are subject to change by SPANSION without a prior notice, thus contact SPANSION about the latest one...
SK-FM3-9BF516N-TOUCHKIT User Guide Contents Contents REVISION HISTORY ......................2 WARRANTY AND DISCLAIMER ..................3 CONTENTS .......................... 5 1 OVERVIEW ........................6 Abstract ........................6 Features of the ADA-FM3-100PMC-TOUCH-SSBS adapter board......6 Features of the SK-FM3-100PMC-MB9BF516N ............6 2 HARDWARE ........................7 Installation .......................
Chapter 1 Overview 1 Overview 1.1 Abstract The SK-FM3-9BF516N-TOUCHKIT contains an SK-FM3-100PMC-9BF516N Starter Kit and an ADA-FM3-100PMC-TOUCH-SSBS touch electrode board with four buttons, a scroll wheel with three elements, and a slider with five elements. In addition, a shield ring driven is provided, which can be used to decouple the touch electrodes from the surrounding ground pattern.
SK-FM3-9BF516N-TOUCHKIT User Guide Chapter 2 Hardware 2 Hardware 2.1 Installation Remove carefully the board from the shipping box and check for any damages. Check the content of the box ADA-FM3-100PMC-TOUCH-SSBS SK-FM3-100PMC-MB9BF516N Starter Kit Modified (RN1 and RN2 removed) and pre-programmed...
Page 8
SK-FM3-9BF516N-TOUCHKIT User Guide Chapter 2 Hardware NOTE: On the SK-FM3-100PMC-9BF516N Starter Kit, the 7-segment LED display SEG1 is connected to the MCU on port pins which are used by the ADA-FM3-TOUCH-SSBS as touch inputs. In order to make full use of the touch electrodes, the resistor networks RN1 and RN2 were already removed from the starter kit to disconnect SEG1.
SK-FM3-9BF516N-TOUCHKIT User Guide Chapter 3 FMtouch software 3 FMtouch software 3.1 CalTool CalTool is a graphical PC frontend to monitor and tune touch parameters, such as sensitivity etc. CalTool can be installed from the CD included in the Starter Kit package, or from the web page shown below.
SK-FM3-9BF516N-TOUCHKIT User Guide Chapter 6 Recycling 6 Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: CCS Express GMBH c/o Spansion International Inc.
Need help?
Do you have a question about the SK-FM3-9BF516N-TOUCHKIT and is the answer not in the manual?
Questions and answers