3.1 Column installation:
If the Handi-Lift is installed on columns you have to start with them.
Place the columns after the measurements on the drawing they are usually numbered
with the lowest number at the foot of the stairs.
When installing the columns be accurate that the columns are plum.
3.2 Upper and lower rail installation:
The rail system contains two types of rail, one for the lower rail and one for the upper
rail. If the upper rail is divided start to assemble the rail by using the assembly fittings
for rail. The lower rail does not need to be assembled before it is installed.
© 2010
3 Install the rails
Page 4
Handi-lift 7
Mark measurement A from
the first and last raise parallel
with the staircase.
(See fig 2 on next page).
Note!
Some lifts has a different
angel than the staircase.
Version 1.0