Forced-Charge Mode (Maintenance Mode); Stand-Alone Mode - Samsung RES 3.6 kWh All In One User Manual

4.1.5 Forced-Charge Mode (Maintenance mode)

(1) In this mode, solar energy generation is not used, but the power continuously flows from
the electric power system to the battery.
[Figure 4-10: Indication screen on Forced charged Mode]

4.1.6 Stand-Alone Mode

When the All In One is disconnected from the energy meter, or the power conversion system
is disconnected from the energy management system (EMS), the All In One system enters
into the Stand-Alone Mode. The system operates in a PV- only mode.
[Figure 4-11: Indication screen on stand-alone mode]
Australia (Eng.) 05/2015. Rev1.1
[Figure 4-9: Indication screen on Standby Mode]
Operating Modes
19