Control Panel Diagnostics And Status Information - NETGEAR ReadyNAS 3100 Hardware Manual

Control Panel Diagnostics and Status Information

The control panel for the ReadyNAS 3100 is located on the top right corner of the unit. Each
function on the control panel is described in the following table.
Control panel
Item
Power
button
System
Reset
Power LED
Disk LED on
the control
panel
16 | Chapter 2: Diagnostics and Maintenance
NIC 2 / NIC 1
LED
System
overheat/
fan failure
Activity Description
Push the Push to turn on the ReadyNAS 3100.The power LED blinks while
button the ReadyNAS 3100 is booting.

Preferred shutdown: If the unit is running, pressing the power
switch once will begin the graceful shutdown blink pattern on the
LEDs. Pressing the power button a second time within 5 seconds
confirms and initiates the graceful shutdown.
Forced shutdown: If the unit is hung, you can press and hold the
power button for 5 seconds to force shutdown.
Push the Reset: Press the reset button once to warm boot the ReadyNAS
button 3100.
Diagnostics: To enter the diagnostic boot menu, see
"Understanding the System Diagnostics Boot Menu"
On (Green) Green: the unit is powered on.
Off Red: Power failure.
Off: the unit is powered off.
On/Blink Blinking amber: disk activity.
(Amber)
ReadyNAS 3100 Hardware Manual
Power
LED
Disk Reset
activity button
Power
button
on page 19.